Fast stretch banner manufacturing and banner print in Kiev
Stretch banner is a construction for banner stretching and advertising banner which is stretched on it.
Stretched banner is a synthetic fabric which is placed on the wall. The image is printed on the fabric
with the help of wide-format printing machine. Banner stretches are regularly placed on the facades of
the buildings. The size of the construction can vary from several square meters to several hundred
square meters. Huge banner stretches are called randmauers.
The advantages of banner stretches are low price and short production time. This fabric also does not
have limits of size thanks to the possibility to solder the banners between themselves, it does not need
extra protection of the print from the fade (for example lamination) and it is also the most suitable for
the frequent replacement of the picture.
The disadvantage is “cheap” look. This factor has a big influence on using such constructions indoors.
Such banners are also unstable to the wind, so when the strong wind blows you have a risk to have a
broken off banner.
The ways to fasten the construction
Banner, which is constructed with the help of the bars
This is the fabric with the image, which is tucked in the aluminum profile in the top and bottom parts of
the banner. The top bar is a holder and the bottom bar is a plummet for stretching a banner with the
image. Such constructions are usually used during the exhibitions, in the shop-windows and also during
advertising campaign and other short-term events, because it is easy to install it. This type of fastening
does not need a lot of holes in the wall and in some cases you can even install the construction without
Banner, which is constructed with the help of cringles
Cringles are placed close to each other along the perimeter (or in the specific places) for stretching and
fastening the banner. This variant of fastening is usually used for outdoor advertising for a long-term
period. This is the most cost conscious variant of qualitative stretching the banner. If the banner is one-
sided and its backside is not well seen then the banner is being Is being glued on its edges for the
The types of advertising banners:
We can manufacture the advertising banner for you from such materials:
- Frontlit. This banner is used for printing from its front side. Its structure can be laminated and alloyed.
If you need cost conscious variant of the banner then you need to choose laminated fabric. It is
intended for using it indoors, because it will be spoiled during one year if you will decide to place it
outdoors. The print looks like gloss. If you wish to order banner, which will hold up for a long time
outdoors or will be frosted then you should choose the alloyed fabric.
- Baclight. This banner is used for manufacturing signboards with illumination inside. We stretch
banners on some facade signboards in Kiev instead of acrylic. It is expediently for seamless signboards
of big size or for constructions, where frequent change of the images is needed. The cost of
manufacturing and printing banners is the most cost-effective.
-Perforated (grid). Manufacturing of advertising banners from grid is used in fabrics for big
constructions, which are placed on facades of the buildings. The usage of grid is necessary here because
of technical considerations, because of the perforation (holes in banner) wind load reduces. The
disadvantage is that the image looks “checkered “if the spectator will stand on a close distance.
- Blockout – The banner for two-side print. This banner consists of three layers. The banner on the outer
layers is used for printing and a layer in the middle is black for blocking the light. Such banners are often
used for manufacturing of exhibition stands for shadows from the construction, on which the banner is
stretched, cannot be seen. We also recommend ordering the fabric with two-side print, which gives
some message for both sides (for example the name of the store department).
You have such ways to print banner in Kiev
Banners are printed on wide-format printing machines with these types of ink:
- Eco solvent ink can give you a qualitative print for indoor usage.
- Solvent are made for indoor usage, have service life up to 3 years.
- Ultraviolet are used for the street constructions, have service life up to 5 years and are expensive.
We carry out the banner print in Kiev by any types of ink!
The illumination of advertising banners is carried out by searchlights (halogen, metal-halogen, LED),
which are placed on the fastening for searchlights.
The exceptions are banner constructions with the illumination from inside on which the banner is
Contact “World of Projects”, if you need fast and qualitative banner manufacturing in Kiev and all over
I want to express gratitude to the collective of Svit Projektiv, especially Goncharenko Irene, for professionalism and responsible going near business. It is pleasant to work with you - orders are made in time and qualitatively. Inspirations to you in-process, successes and many good clients.